Table of Contents
Advertisement
Running the BIOS IPMI configuration
To configure the IPMI in the BIOS:
1.
Restart the remote server, then press <Del> during POST to enter the BIOS
setup.
2.
Go to the Server menu, then select the IPMI Configuration sub-menu. Use
this sub-menu to configure the IPMI settings.
3.
When finished, press <F10> to save your changes and exit the BIOS setup.
Main
Advanced
Console Redirection
DMI Event Logging
IPMI
F1
Help
ESC:
Exit
IPMI Configuration
Main
Advanced
IPMI Specification Version
BMC Firmware Version
System Event Logging
Clear System Event Log
Existing Event Log number
Event Log Control
SYS Firmware Progress
BIOS POST Errors
BIOS POST Watchdog
OS Boot Watchdog
Timer for loading OS (min)
Time out action
Date Format to show
Date Separator
F1
Help
ESC:
Exit
2-14
PhoenixBIOS Setup Utility
Server
Security
Select Item
↑↓
Select Menu
→←
PhoenixBIOS Setup Utility
Server
Security
IPMI
Select Item
↑↓
Select Menu
→←
Boot
Exit
-/+
Change Values
Enter
Select
Sub-menu
Boot
Exit
2.0
1.04
[Enabled]
[Disabled]
34
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[ 10]
[No action]
[MM DD YYYY]
[/]
-/+
Change Values
Enter
Select Sub-menu
Item Specific Help
Additional setup menus to
configure console.
F9
Setup Defaults
F10
Save and Exit
Item Specific Help
Enable/Disable IPMI
event logging. Disabling
will still log events
received via the system
interface.
F9
Setup Defaults
F10
Save and Exit
Chapter 2: Installation
Advertisement
Table of Contents
