Acura MDX Owner's Manual page 72

Hide thumbs Also See for MDX:
Table of Contents

Advertisement

Indicator
Name
Low Oil Pressure
Indicator
Malfunction
Indicator Lamp
Charging System
Indicator
On/Blinking
Comes on when you set the power
mode to ON, and goes off when
the engine starts.
Comes on when the engine oil
pressure is low.
Comes on when you set the power
mode to ON, and goes off either
when the engine starts or after
several seconds if the engine did
not start. If "readiness codes" have
not been set, it blinks five times
before it goes off.
Comes on if there is a problem with
the emissions control systems.
Blinks when a misfire in the
engine's cylinders is detected.
Comes on when you set the power
mode to ON, and goes off when
the engine starts.
Comes on when the battery is not
charging.
Explanation
Comes on while driving - Immediately
stop in a safe place.
2 If the Low Oil Pressure Indicator
Comes On P. 470
Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 489
Comes on while driving - Have your
vehicle checked by a dealer.
Blinks while driving - Stop in a safe place
where there are no flammable objects.
Stop the engine for 10 minutes or more,
and wait for it to cool down. Then, take
your vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 471
Comes on while driving - Turn off the
climate control system and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator
Comes On P. 470
uuIndicatorsu
Message
Continued
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdx 2014Mdx 2015

Table of Contents