Acura MDX Owner's Manual page 409

Hide thumbs Also See for MDX:
Table of Contents

Advertisement

uuMaintenance Under the HooduEngine Coolant
Radiator
Radiator Cap
408
1. Make sure the engine and radiator are
cool.
2. Remove the engine compartment cover.
2 Engine Compartment Cover P. 401
3. Turn the radiator cap counterclockwise and
relieve any pressure in the coolant system.
Do not push the cap down when turning.
4. Push down and turn the radiator cap
counterclockwise to remove it.
5. The coolant level should be up to the base
of the filler neck. Add coolant if it is low.
6. Put the radiator cap back on, and tighten it
fully.
7. Pour coolant into the reserve tank until it
reaches the MAX mark. Put the cap back
on the reserve tank.
1Radiator
WARNING
3
Removing the radiator cap while the
engine is hot can cause the coolant to spray
out, seriously scalding you.
Always let the engine and radiator cool
down before removing the radiator cap.
NOTICE
Pour the fluid slowly and carefully so you do not spill
any. Clean up any spills immediately; they can
damage components in the engine compartment.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdx 2014Mdx 2015

Table of Contents