Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hark HK0516
Summary of Contents for Hark HK0516
-
Page 1: Assembly And Operation
OUTDOOR CRAB COOKER SET g r i l l r o a s t s m o k e ASSEMBLY AND OPERATION INSTRUCTIONS IMPORTANT READ THESE INSTRUCTIONS FOR USE CAREFULLY. FAMILIARISE YOURSELF WITH THE APPLIANCE BEFORE CONNECTING IT TO A GAS CONTAINER. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. -
Page 3: Warranty Details
Outdoor Crab Cooker Set Warranty Details Hark Enterprises Pty Ltd warrants that this genuine HARK® brand product is free from defects in workmanship and materials for 12 months from the date of purchase. If as a result of normal use in compliance with the manufacturer’s instructions the product fails to operate within the warranty period, we will repair or replace the product. - Page 4 Model No.: HK0516 Product Name: OUTDOOR CRAB COOKER SET - For propane (LPG) use only. Line drawings are not to scale. Actual products may differ from drawing depending on the model purchased. Specifications are subject to change without notice. HAZARDOUS FIRE OR EXPLOSION MAY RESULT IF INSTRUCTIONS ARE IGNORED.
-
Page 5: Expanded View
EXPANDED VIEW Parts List Name Tools needed for assembly Base Adjustable Wrench and Phillips Head Burner Screwdriver (not included) Hose & Regulator Before assembly Heat shield Base ring Please read all instructions thoroughly Leg (x 3) before proceeding. Stability bracket (x 3) Find a large, clean area in which to assemble your Crab Cooker Set. -
Page 6: Step 2 Leg Assembly
A. ASSEMBLY OF CRAB COOKER STEP 1 SECURING THE CAST BURNER TO THE BASE — Place base (1) upside down on an even surface. The wider ring of the base should be facing down¬ward. — Locate the burner mount bar stretching across the narrower ring of the base. - Page 7 STEP 3 METAL BASE RING ASSEMBLY — Insert the metal base ring (5) in between all three legs so that each of three holes on the ring match up with each hole at the end of the legs. — Securely fasten the ring by inserting a M6X10 screw into each hole and tightening with a M6 nut.
-
Page 8: The Gas System
B. THE GAS SYSTEM GAS AND REGULATOR INFORMATION This cooker is designed for propane (LPG) gas use only. Gas bottles with a "POL" connection are to be used with this Crab Cooker Set. Suitable regulators must have an outlet pressure of 69 kPa. You must have the proper regulator and bottle in order for the Crab Cooker Set to operate safely and efficiently. -
Page 9: Installation
LEAK TESTING Open the gas control valve on the cylinder. Check for leaks by brushing a solution 1/2 water and 1/2 soap over all gas system joints, including all valve connections, hose connections and regulator connections. DO NOT USE AN OPEN FLAME to test for leaks at anytime. If bubbles form over any of the joints, there is a leak. -
Page 10: Operation
D. OPERATION WARNINGS — This Crab Cooker Set should not be used indoors. USE OUTDOORS ONLY. — Read the instructions carefully before using the appliance. — Caution: Accessible parts may be very hot. Keep young children away. — This appliance is not intended to be installed or used on a recreational vehicle or marine environment. -
Page 11: Lighting The Burner
E. LIGHTING THE BURNER — Insure that the regulator control valve is in the off position. — Slowly rotate the gas cylinder valve anti-clockwise to the on position. — Using a long BBQ match or gas lighter for safety, insert a flame underneath the wind shield to the burner. - Page 12 USING THE COOKING POT WARNING Never use pots or other vessels that are not designed for use on this appliance. All cooking vessels must fit inside the top ring of the base (1). Pot must not over hang the base ring (1) —...
-
Page 13: Care And Maintenance
F. CARE AND MAINTENANCE Warm soapy water is recommended to be used to wipe down the surfaces of the appliance. CAUTION – You must let the appliance cool down before you clean it. NEVER douse the crab cooker with water when the surfaces are hot. DO NOT submerge in water. - Page 14 Diagrammatical Representation of "OUTDOOR AREAS" THIS APPLIANCE SHALL ONLY BE USED IN AN ABOVE GROUND OPEN-AIR SITUATION WITH NATURAL VENTILATION, WITHOUT STAGNANT AREAS, WHERE GAS LEAKAGE AND PRODUCTS OF COMBUSTION ARE RAPIDLY DISPERSED BY WIND AND NATURAL CONVECTION. THIS CRAB COOKER SET IS NOT DESIGNED FOR MARINE USE. ANY ENCLOSURE IN WHICH THE APPLIANCE IS USED SHALL COMPLY WITH ONE OF THE FOLLOWING: —...
- Page 15 — Within a partial enclosure that includes an overhead cover and more than two walls, the following shall apply: a) at least 25% of the total wall area is completely open, and b) at least 30% of the remaining wall area is open and unrestricted (Refer to examples 3, 4 and 5).
-
Page 16: Replacement Parts
100cm above the Crab Cooker Set. Made in China Made in China This Crab Cooker is manufactured by: Imported by: Hark Enterprises Pty Ltd Huzhou Metalwork Co Ltd Unit 11, 41-49 Norcal Rd Industrial Park, Donglin Nunawading VIC 3131 Zhejiang Province Local Call: 1300 799 787 (Excl. - Page 17 Hark Enterprises Pty Ltd Unit 11, 41-49 Norcal Rd, Nunawading, VIC 3131 T: 1300 799 787 E: sales @ hark.com.au W: www.hark.com.au...