Connecting The Tv And Players; Hdmi Cable Connection - Onkyo TX-RZ900 Basic Manual

2

Connecting the TV and players

TV
To use the ARC function, connect to the ARC
compatible HDMI jack of the TV and make an
appropriate setting on the unit. See "2 Source
Connection" of "Step 2: Initial Setup".
Blu-ray Disc/
DVD player

HDMI cable connection

Refer to the above figure and connect the player to the
HDMI jack on the back of this unit. For example, connect
a Blu-ray Disc Player to the HDMI IN1 (BD/DVD) jack. To
play the player, press the INPUT SELECTOR button on the
remote controller with the same name as the jack to which
you connected the player so that the input on the unit is
selected.
To connect the TV and the unit, connect the HDMI OUT
MAIN jack of the unit and the HDMI IN jack of the TV
using an HDMI cable. With this connection, it becomes
possible to display the setting screen of the unit on the
TV or transmit video/audio signals from the player to the
TV. If your TV supports ARC (Audio Return Channel), it
is possible to play the TV sound with the AV receiver's
HDMI
IN
HDMI
OUT
HDMI cable
HDMI
OUT
Satellite/Cable
set-top box, etc.
speakers with this connection only. If your TV does not
support ARC, you need, in addition to the HDMI OUT MAIN
jack connection, a digital optical cable connection between
the digital audio out optical jack of the TV and the DIGITAL
IN OPTICAL jack of the unit or an analog audio cable
connection between the audio output jack of the TV and the
AUDIO IN TV jack of the unit.
HDMI
OUT
Game console
HDMI
OUT
HDMI
Personal computer
OUT
Streaming media player, etc.
z Audio connection with a TV not supporting ARC
z
＊ Select an appropriate connection
for your TV.
TV
AUDIO
OUT
DIGITAL
OPTICAL
OUT
The unit supports the HDMI Standby Through function that
allows transmission from players to the TV even if the unit
is in standby. You have to modify the settings to enable
the input selection link with CEC (Consumer Electronics
Step 1: Connections
En-9