Illustrated Parts List - Curtis G4GEMT Service Manual

5. Clean all parts. Thoroughly rinse with clear warm water.
6. Dry and assemble the handle/bonnet parts. Hand-tighten the assembly onto the faucet.
7. Remove the gauge glass tube by unscrewing the gauge glass cap.
8. Clean the gauge glass tube and the two washers with a gauge brush and detergent solution. Rinse with clear
water. Dry the parts and assemble them onto the satellite.
DO NOT immerse the satellite in water or any other liquid.
9. Clean inside of the satellite. Remove coffee residue with the detergent solution.
10. Thoroughly rinse out the satellite with clear warm water.

Illustrated Parts List

GEM-3 SATELLITE SERVER, GEM-5, WARMER,
GEM-8 WARMER SHORT
12
11
3
4
2
10
5
6
8
7
ITEM № PART № DESCRIPTION
1 WC-5622
LID, SATELLITE PLASTIC GEM3
1A WC-3307
LID, SATELLITE STAINLESS (OLDER UNITS)
2 WC-2102 GAUGE GLASS ASSEMBLY 8"
3 WC-2005* WASHER, SHIELD CAP 1/8"
4 WC-2010C SHIELD, 8 INCH GAUGE GLASS
5 WC-2025* GAUGE GLASS, 8 INCH
6 WC-2006* WASHER, SHIELD BASE 3/16"
7 WC-1800 FAUCET, S' NON-LOCKING
7A WC-1841
FAUCET, ESP BLACK NON-LOCKING PLASTIC
8 WC-3705*
KIT, FAUCET S' SERIES
9 WC-1901A-103K KIT, SHANK ASSY, FAUCET W/SHIELD BASE O-RING
9A WC-1901A SHANK, FAU. W/SHLD. BASE (UNITS BUILT AFTER 2/15)
10 WC-37102* KIT, WARMER ELEMENT 100W 120V (GEM-5 & -8)
11 WC-3503* LEG, SCREW BUMPER 3/8"– 16 STD (GEM-5 & -8)
12 WC-114R* SWITCH, ROCKER (RED) 120V SPST (GEM-5 & -8)
* Recommended parts to stock.
1
9
15