Sdk Library; Sdk Functions List - Argox PA-20 Programming Manual

SDK Library

Function
Reader
InitScanner1
Decode
SleepScanner1
HaltScanner1
TriggerStatus
Scanner_Reset
Scanner_Config_Start
Scanner_Config_End
Scan_SendCommand
SCAN_SendCommand_Laser
Scan_QueryStatus
SCAN_QueryStatus_Laser
ScannerSetFromFile
Scanner_Version
Sim_ScanKey_Press
Buzzer
beeper_status
off_beeper
on_beeper
SetBuzzerVol
Calender
DayOfWeek
get_time
set_time
Bluetooth(ForPA-2010 /
PA-2110)
BT_Start
BT_Stop
BT_Open
PT-20 Programming Guide

SDK Functions list

Description
Initialize respective scanner port.
Perform barcode decoding.
Set scanner module sleep.
Stop the scanner port from operating.
To check the scan key status.
Set scanner setting to default.
To start scanner setting procedure.
To end scanner setting procedure.
Send scanner(CCD) command to change scanner status.
Send scanner(Laser) command to change scanner status.
Query the scanner(CCD) current setting.
Query the scanner(Laser) current setting.
Set scanner setting by scanner setting file. This file is made
by utility "ScanSetting".
Query the scan module version.
To simulator the "Scan" key press or release.
To see whether a beeper sequence is under going or not.
Terminate beeper sequence.
Assign a beeper sequence to instruct beeper action.
Set the buzzer volume.
Get the day of the week information.
Get current date and time.
Set new date and time to the calendar chip.
Bluetooth module power enable.
Bluetooth module power disable.
Bluetooth connect.
15