Dodge Challenger 2014 Owner's Manual page 234

232 UNDERSTANDING YOUR INSTRUMENT PANEL
Automatic Compass Calibration
This compass is self-calibrating, which eliminates the
need to set the compass manually. When the vehicle is
new, the compass may appear erratic and the EVIC will
display "CAL" until the compass is calibrated. You may
also calibrate the compass by completing one or more 360
degree turns (in an area free from large metal or metallic
objects) until the "CAL" message displayed in the EVIC
turns off. The compass will now function normally.
Manual Compass Calibration
If the compass appears erratic and the "CAL" message
does not appear in the EVIC display, you must put the
compass into the Calibration Mode manually as follows:
1. Turn the ignition switch ON.
2. Press and release the MENU button until Personal
Settings displays in the EVIC.
3. Press the UP or DOWN button until "CALIBRATE
COMPASS" displays in the EVIC.
4. Press and release the SELECT button to start the
calibration. The message "CAL" will display in the
EVIC.
5. Slowly complete one or more 360-degree turns (in an
area free from large metal or metallic objects) until the
"CAL" message turns off. The compass will now
function normally.
Compass Variance
Compass Variance is the difference between Magnetic
North and Geographic North. To compensate for the
differences, the variance should be set for the zone where
the vehicle is driven, per the zone map. Once properly
set, the compass will automatically compensate for the
differences and provide the most accurate compass head-
ing.
I n f o r ma t i o n P r o v i d e d b y :