Removing Of Major Parts - Sharp LC-45GD7U Service Manual

1. Remove the Terminal Covers 1.
2. Detach the SD Card Cover, BUS-CONE Cover, PC Card Cover, DVI Cover.
3. Remove the 2 lock screws 2 and detach the Stand Cover.
4. Remove the 4 lock screws 3 and detach the Stand.
5. Remove the 4 lock screws 4, the 2 SP Cords 5 and detach the Speaker.
6. Remove the 13 lock screws 6, 6 lock screws 7, 9 lock screws 8 and detach the Rear Cabinet.
2
Stand Cover
7. Remove the 5 lock screws 9 and detach the Wire Shield.
8. Remove the 11 lock screws 0. Disconnect [FA] connector. Detach the Center Angle.
9. Remove the KEY PWB.
9-1.Disconnect the [KM] connector.
9-2.Remove the 2 lock screws q from the Top Control Cover.
9-3.Remove the 3 lock screws w from the KEY PWB.
10
10

REMOVING OF MAJOR PARTS

BUS-CONE Cover
7
8
1
Terminal Cover
SP Cord (L)
5
4
4
3
Stand
11
Top Control Cover
KEY PWB
12
Center Angle
SD Card cover
PC Card Cover
DVI Cover
6
8
7
8
SP Cord (R)
5
Terminal Cover
Speaker
[FA]
[KM]
15
LC-45GD7U
Rear Cabinet
1
9
Wire Shield