Fx Pattern Replacement (Vl3500 Wash Fx Only) - Philips Vari-lite VL3500 Wash User Manual

FX Pattern Replacement (VL3500 Wash FX Only)

WARNING: Remove power from luminaire before performing maintenance. Patterns can be HOT
after operation. Allow the fixture to cool before removing patterns.
WARNING: Users of VARI❋LITE® luminaires should not install or use metal effects patterns or
gobos. The use of metal effects patterns or gobos in any VARI❋LITE® product may damage the
luminaire and could void the luminaire's warranty.
Tools:
Screwdriver, Phillips #2
Cotton gloves
To remove and replace an effects pattern on rotating effects wheel:
Step 1. Remove power from luminaire.
Step 2. Remove head cover by loosening the four 1/4-turn screws.
Step 3. As shown in
02.96 86.000 1 B
Head Cover
Figure A-6: VL3500 Wash FX Pattern Replacement
Figure A-6, open door on the cooling-air duct.
01 J un e 20 09
T
ROUBLESHOOTING AND
A
M
AINTENANCE
Access Door
(Cooling air duct)
FX Pattern
Assembly
71