Menu Function Definitions - Philips Vari-lite VL3500 Wash User Manual

❋
VARI LITE® - VL3500™ W

Menu Function Definitions

For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Display
10 Min
30 Sec
5 Min
Address
All SEQ
Aperture
Cal ON
Channel
XXX
Chg Lum
ID
Cmd Lock
Col Wheel
Col Wheel2
Config
CTO
Cyan
Data
Dimmer
Disable
Display
Disp Tilt
DMX
Download
Enable
Encoder
FAIL
Fixt Hrs
56
L U
ASH UMINAIRE
Table 4-2: Menu Function Definitions
Definition Purpose
10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address Accesses option for setting luminaire DMX starting address.
All Sequence Tests all internal mechanisms in sequence for X steps.
Aperture Sets aperture opening positions and test aperture function.
Calibration On Configures arc luminaire so that lamp will strike after calibration.
DMX Channel Specifies DMX channel for display of current data value.
(Only for channels the luminaire is occupying).
Change Normally set to luminaires serial number.
Luminaire ID
Remote Denies (lock On) or allows (lock Off) remote lamp power-level changes from
Lamp-Level the console. When Lamp Level is set to 1500W, 1200W, or 900W, Cmd Lock
Command On locks that power-level setting at the luminaire and any attempt to change
Lock the power-level setting from the console is ignored.
Color Wheel 1 Specifies color wheel for manual control (Manual) or testing (Test).
Color Wheel 2 Specifies color wheel for manual control (Manual) or testing (Test).
System Accesses options for setting lamp, pan/tilt, and Menu Display defaults. Also
Configuration accesses lamp information such as number of hours used, along with its
respective reset function.
CTO Function Specifies CTO (color temperature orange) parameter for manual control (Man-
ual) or testing (Test).
Cyan Specifies cyan color parameter for manual control (Manual) or testing (Test).
DMX Data Allows viewing of DMX on given channel.
Dimmer Specifies dimmer mechanism for manual control (Manual) or testing (Test).
Disable Disables a function.
Display Accesses options for Menu Display illumination time and orientation.
Menu orienta- Sets the orientation of the menu display to match the luminaire orientation,
tion control either standing (Up) or hanging (Down). The Auto setting is functional only for
display boards manufactured prior to 01 July 2006.
DMX Accesses options for DMX system settings.
Download Initiates download of luminaire software.
Enable Enables a function.
Encoder Accesses pan/tilt encoders for diagnostic testing.
Test Fail Indicates that a test has failed.
Fixture Hours Displays total number of hours luminaire has been powered on.
' M
SER S ANUAL
01 J un e 20 09 02 .9 686 .00 01 B