Page 5
Fitting the face CLICK CLICK Removing the face CLICK...
Page 6
Wand docking 601059 237578 Cleaning the tool head...
Page 7
Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmentally - friendly manner. Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the Numatic Technical helpline +44 (0)1460 269268 Daily Keep the machine clean, including hoses and tubes.
Page 8
● Replace any worn or damaged parts immediately. ● Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a competent person using the correct Numatic original part. ● Change dust bag frequently.
● Unreel the cable with one pull or pull on the cable to unplug the machine from the power supply. ● Use to suck up hot ashes or lighted cigarette ends. ● Use steam cleaners, pressure washers or immerse in water to clean the machine. ●...
Vacuum Cleaner Type: HVR, HET, HHR, HVX, HDK, HDX, HDH, HRP, HEP, VNR, NNR, series NRV, EVR Manufactured by: Numatic International Limited Relevant standards upon which conformity is declared include: IEC 60335-1 EN 60335-1:2012 IEC 60335-2.2 IEC 60335-2.69 EN 60335-2.69:2012...