Page 1
For complete warranty details, additional information about Concept2 or to português . . . . . . . . . . . . . . . . . . 23-26 register to receive important product dansk .
[CHANGE DISPLAY] a new the logcard to ensure proper storage of data . (if no logcard present, data is stored in Memory .) use the “concept2 logcard utility” to back up your display is shown . see below . logcard data to your pc . (usB cable provided) Note: a logcard is provided with every performance monitor (pm) .
Page 4
. this can be done wirelessly /500 1:53.2 or by using ethernet patch cables available from concept2 . if using cables, be Watt sure to plug them in before starting the race .
5 Lane 1 racer just behind you 6 peterd -12m certain environments where other devices (WiFi, Bluetooth, etc.) are in use, concept2 suggests use of cables . only one wireless meters position Information race can be in progress at a time .
“wake up,” try one of the following: • Insert a paper clip (PM3) or pen/pencil tip (PM4) into the reset hole on the back and press lightly. • Remove the batteries for 30 minutes and insert two new alkaline D-Cell (LR20) batteries.
Need help?
Do you have a question about the PM3 and is the answer not in the manual?
Questions and answers