Menu Items - Samsung 690 Installation Manual

Menu Items

¦
To Enter this menu: Press the
To exit from this menu: Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Hotel TV Function
Category
Hospitality
Hospitality Mode
Mode
SI Vendor SI Vendor
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On
Power On Volume Num
Min Volume
Max Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Channel
Channel Bank Editor
Dynamic SI
→ → →
MUTE 1 1
Item
Select Hospitality mode.
y Interactive mode: TV works with an SI STB or SBB.
y Standalone mode : TV works alone, without an SI STB or SBB.
y Interactive mode: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
SeaChange / MDC / Innvue
y Standalone mode: OFF / Smoovie
Set the default values that will be applied when the TV is turned.
y User Defined: Lets you set Power On Channel and Channel Type manually. See Power On
Channel and Channel Type below.
y Last Saved: If you select this item, when the TV is turned on, it displays the channel it was
displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
y Select channel band: AIR (analog air band), DTV (digital air band), CATV (analog cable band),
CDTV (digital cable band).
y User Defined: Lets you set the Power On Volume manually. See Power On Volume below.
y Last Saved: When the TV is turned on, it returns to the volume that had been set when the
power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
The maximum Volume Level the user in Stand Alone Hospitality mode.
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
y Last Option: Returns to its last Power state. If it was in Stand-by, it returns to Standby. If it
was on, it turns on.
y Power ON: When the power returns, the TV turns on.
y Standby: When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the user
Channel menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor
you can:
y Change the channel numbers and names, and sort the channels in your desired channel
number order.
y Apply the video mute to channels you select. The video mute blanks out the video from a
channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without your
having to display each channel directly.
If you set Hospitality Mode to Standalone and SI Vendor to Smoovie, this item is displayed.
Lets you edit the channel bank that works with the Smoovie Remote. Refer to page 36~37.
y ON: Check the DTV Program channel number. (If Dynamic SI is On, it is not available to edit
DTV channels in Channel Editor.)
y OFF: Does not check the DTV Program channel number. (If Dynamic SI is Off, it is available to
edit DTV channels in Channel Editor,but additional DTV channel program number update is
not supported.)
→ ENTERE buttons in order.
9
Description
21
English