4. Pull out the heater upward.
6.14. Bread pan
1. Turn the bread pan upside down and remove 3 screws.
2. Remove the packing.
Tips on assembly
• Set the positioning marks across from each other when
assembling the mounting shaft assy and the bread pan.
6.15. Post-assembly confirmation
Confirm the insulation resistance, insulation proof stress and operation response after reassembling.
1. Insulation resistance: Upper than 2M ohm at DC500V
2. Insulation proof stress: Longer than 1 min. at AC1000V
3. Operation response: Confirm the device performance in
the manner of "Test Mode."
41