Table of Contents
Advertisement
CHAPTER -9: TROUBLESHOOTING
FAULT
Excessive foam is
formed in the detergent
drawer.
Unsatisfactory washing
result.
POSSIBLE
CAUSE
Excessive amount
of detergent used.
Wrong detergent used.
The contamination
degree of your laundry
does not match the
programme you have
chosen.
Amount of detergent
used insufficient.
Laundry in ex-
cess of maximum
capacity put in your
machine.
TROUBLE-
SHOOTING
Press on Start/Pause
button. To eliminate foam
formation, mix a spoon
of softener with half
litres of water, and pour
the mixture in the deter-
gent drawer. After 5-10
minutes, Press on Start/
Pause button again. In
your next washing opera-
tion, Adjust the detergent
dose accordingly.
Use detergents pro-
duced only for automat-
ic washing machines in
your machine.
Select the programme
appropriate for the
contamination degree
of your laundries. (See
programme table)
Adjust the amount of
detergent based on the
amount and contami-
nation degree of your
laundries.
Load your machine with
laundries, amount of
which will not exceed
maximum laundry ca-
pacity.
69
69
Hide quick links:
Advertisement
Table of Contents
