Automatic Fault Warnings And; What To Be Done - Haier HW50-10F1 User Manual

CHAPTER -10: AUTOMATIC FAULT WARNINGS AND

WHAT TO BE DONE

Your machine is equipped with the systems which are
capable of both taking necessary precautions and warning
you in case of any breakdown by means of continuous self-
checking during washing operations.
TROUBLE
CODE
E01
Wash
Rinse
E02
Wash
Rinse
End
E03
Wash
Rinse
End
E04
Wash
Rinse
Please see the warranty card for details on how to contact
the Service Centre
(*) See the chapter regarding maintenance and cleaning of
your machine.
POSSIBLE
FAULT
The door of
your machine is
left open.
The water pressure
or the water level
inside the machine
is low.
The pump is faulty or
pump filter is clogged
or electrical connec-
tion of the pump is
faulty.
Your machine has
excessive amount of
water.
WHAT TO DO
Close the machine door. If your
machine persists to indicate fault,
turn off your machine, unplug it
and contact the nearest authorised
service immediately.
Turn on the tab. Mains water may be
cut-off. If the problem still continues,
your machine will stop after a while
automatically. Unplug the machine,
turn off your tab and contact the
nearest authorised service.
Clean the pump filter. If the problem
persists, contact the nearest author-
ised service. (*)
Your machine will discharge
water by itself. Pursuant to dis-
charging operation, turn off your
machine and unplug it. Turn off
your tab and contact the nearest
authorised service.
72 72