Mounting On A Table - LG 55UF6807 Owner's Manual

Turns the power off.
Clears on-screen displays and returns to
TV viewing.
Changes the input source.
Accesses the Quick Settings.
NOTE
• When your finger over the joystick button
and push it to the up, down, left or right, be
careful not to press the joystick button. If
you press the joystick button first, you may
not be able to adjust the volume level and
saved programmes.
Mounting on a
table
(Image shown may differ from your TV.)
1 Lift and tilt the TV into its upright position on
a table.
• Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Using the kensington
security system
(This feature is not available for all models.)
• Image shown may differ from your TV.
The Kensington security system connector
is located at the rear of the TV. For more
information of installation and using, refer
to the manual provided with the Kensington
security system or visit http://www.kensington.
com. Connect the Kensington security system
cable between the TV and a table.
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
• If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope. Make sure to keep
the rope horizontal with the flat surface.
15