SBC -775 Instruction Manual page 5

Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 SBC-775 Pentium
• 1 Pentium II CPU and cooling fan (optional)
• 1 OBS temperature sensor
• 1 Quick Installation Guide
• 1 supporting CD-ROM
• 2 disks, for OBS Win95 drivers
• 1 FDD cable
• 1 EIDE HDD cables
• 1 printer cable
• 1 ivory cable for keyboard and mouse
• 1 ATX-to-PS/2 power cable
• 1 Pentium II CPU retention module
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
We have carefully inspected the SBC-775 mechanically and
electrically before shipment. It should be free of marks and scratches
and in perfect working order upon receipt.
As you unpack the SBC-775, check it for signs of shipping damage.
(For example, damaged box, scratches, dents, etc.) If it is damaged or it
fails to meet the specifications, notify our service department or your
local sales representative immediately. Also notify the carrier. Retain
the shipping carton and packing material for inspection by the carrier.
After inspection, we will make arrangements to repair or replace the
unit.
Caution! Always ground yourself to remove any static charge
before touching the CPU card. Modern electronic
devices are very sensitive to static electric charges.
Try to use a grounding wrist strap at all times. Place
all electronic components on a static-dissipative
surface or in a static-shielded bag when they are not
in the chassis.
®
II single board computer