1. Manuals
  2. Brands
  3. SBC Manuals
  4. Motherboard
  5. R-102-D5
  6. User manual

SBC R-102-D5 User Manual

R-102 series mini-itx motherboard support socket g2 for intel atom d2550/n2600/n2800 cpu, vga/lvds/dvi, dual gbe, pci, sata 3gb/s and audio.
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
R-102-D5/N6/N8 Series
Mini-ITX Motherboard Support Socket G2 for
Intel® ATOM D2550/N2600/N2800 CPU, VGA/LVDS/DVI,
Dual GbE, PCI, SATA 3Gb/s and Audio
.
R-102-D5
R-102-N6/N8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R-102-D5 and is the answer not in the manual?

Questions and answers

Related Manuals for SBC R-102-D5

Summary of Contents for SBC R-102-D5

  • Page 1 R-102-D5/N6/N8 Series Mini-ITX Motherboard Support Socket G2 for Intel® ATOM D2550/N2600/N2800 CPU, VGA/LVDS/DVI, Dual GbE, PCI, SATA 3Gb/s and Audio R-102-D5 R-102-N6/N8...
  • Page 2 R-102 Series User’s Manual R-102-D5/N6/N8 USER’S MANUAL Model No. Description R-102-D5 Intel ATOM D2550 1.86 GHz 2x 512K L2, 10W TDP, dual-core CPU R-102-N6 Intel ATOM N2600 1.6 GHz 2x 512K L2, 3.5W TDP, dual-core CPU R-102-N8 Intel ATOM N2800 1.86 GHz 2x 512K L2, 6.5W TDP, dual-core CPU Note : R-102-XX series : 2x LAN, 6x COM port.
  • Page 3 Revision Revision Date Version Changes Nov 15, 2012 A1.0 Initial release...

  • Page 4: Notice

    R-102 Series User’s Manual Notice Copyright The copyright of this user’s guide belongs to any authorized company and is protected by copyright law. This means partial or full duplication of this document (electronically, mechanically or otherwise) is prohibited without the permission of the authorized company.

  • Page 5: Introduction

    Notice Introduction Thanks for choosing the next generation high performance motherboard “R-102-D5/N6/N8 series”. The uses the high performance Intel® NM10 chipset that will deliver superior performance to your computer. About This User’s Guide This User’s Guide is for assisting system manufactures and end user in setting up and installing the motherboard.
  • Page 6 R-102 Series User’s Manual...

  • Page 7: Table Of Contents

    Table of Content Table of Content Notice .................... 4 Copyright ....................4 Registered Trademark ................4 Introduction ....................5 About This User’s Guide ................5 DISCLAIMER....................5 REMARK ....................5 Table of Content ................7 Chapter 1 : Unpacking ............... 10 1.1 Anti-static Precautions ..............10 1.2 Unpacking Precautions ..............10 1.3 Packing List ..................
  • Page 8 R-102 Series User’s Manual CN_JCOM2........................26 3.2.8 COM3~6 Connector : CN_COM3~6(Pitch 2.0mm)..........27 3.2.9 COM3~6 Voltage Setting Jumper : CN_JCOM3~6 (Pitch 2.0mm) ..... 28 3.2.10 SPI Flash Connector : CN_SPI1 (Pitch 1.27mm) ..........28 3.2.11 LVDS Voltage Jumper : CN_ JLVDS1 (Pitch 2.54mm) ........29 3.2.12 PS2 KB/Mouse Connector : CN_PS1 (Pitch 2.0mm) ........
  • Page 9 Table of Content...

  • Page 10: Chapter 1 : Unpacking

    R-102 Series User’s Manual Chapter 1 : Unpacking 1.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the Make sure to adhere to the following guidelines: Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge.

  • Page 11: Packing List

    Chapter 1 : Unpacking 1.3 Packing List If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the reseller or vendor. The R-102 series is shipped with the following components: Item and Part Number Quantity R-102 series Motherboard SATA cable (CAB-N07330)

  • Page 12: Chapter 2 : Introduction

    R-102 Series User’s Manual Chapter 2 : Introduction 2.1 Introduction The R-102 series Mini-ITX motherboard is a Intel® ATOM processor platform. Up to two 4.0 GB 800/1066 MHz DDR3 SDRAM SO-DIMM are supported by the Intel® processor. NM10 chipset supports a PCI slot. The integrated Intel®...

  • Page 13: Connectors

    Chapter 2 : Introduction 2.2 Connectors The connectors on the R-102 series are shown in the figure below. Front side : DB-9 Audio : Serial port : Line In COM1 Line Out LAN and DC IN 4pin COM2 USB 2.0 Front Audio SPDIF DB-9 Serial port :...

  • Page 14: Dimensions

    R-102 Series User’s Manual 2.3 Dimensions 2.3.1 Board Dimensions The dimensions of the board are listed below : Length: 170 mm / Width: 170 mm...

  • Page 15: External Interface Panel Dimensions

    Chapter 2 : Introduction 2.3.2 External Interface Panel Dimensions External peripheral interface connector panel dimensions are shown below :.

  • Page 16: Block Diagram Block Diagram

    R-102 Series User’s Manual 2.4 Block Diagram Block Diagram The data flow between the two on-board chipsets and other components installed on the motherboard and described in the following sections of this chapter. DDR3 SDRAM (800/1066 MHz) Channel A SO-DIMM1 Intel®...

  • Page 17: Technical Specifications

    Chapter 2 : Introduction 2.5 Technical Specifications R-102 technical specifications are listed in table below. Intel® Atom processor N2800, 1.86 GHz 2x 512K L2, 6.5W TDP, dual-core heatsink (fanless solution) Intel® Atom processor N2600, 1.6 GHz 2x 512K L2, Processor 3.5W TDP, dual-core heatsink (fanless solution) Intel®...
  • Page 18 R-102 Series User’s Manual LVDS supports 24-bit dual-channel by CH7511 DP to LVDS converter, resolution support up to 1920x1200 for D2550, 1600x1200 for N2600/N2800 Realtek ALC888 HD 6-channel CODEC Audio Line out / line in / microphone ports Super I/O W83627DHG Rear side : 2x Serial, DB-9 connector :...
  • Page 19 Chapter 2 : Introduction Watchdog Timer Software programmable supports 1~255 sec. system reset Boot Up mode ATX / AT Standard 20-pin ATX power supply and Power Connector Power adapter DC 9 ~ 24V input Operation Humidity 10% ~ 95% relative humidity, non-condensing Operating: 0°C ~ +60°C (32°F ~ 140°F), Storage: -20°C ~ Temperature +80°C (-4°F ~ +176°F)

  • Page 20: Chapter 3 : Connectors

    R-102 Series User’s Manual Chapter 3 : Connectors 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 R-102 Series Layout The figures below show all the connectors and jumpers. DVI_CRT COM1(TOP)_COM2 AUDIO_JACK1 USB_RJ45_1 USB_RJ45_2 CN_JLVDS_SEL1 CN_JCOM1 CN_LVDS1 CN_JCOM2 82574L...

  • Page 21: Internal Peripheral Connectors/Jumpers

    Chapter 3 : Connectors 3.2 Internal Peripheral Connectors/Jumpers The section describes all of the connectors on the R-102 series. 3.2.1 Audio Connector : CN_AUDIO1(Pitch 2.54mm) PIN NO. DESCRIPTION PIN NO. DESCRIPTION MIC2L MIC2R ACZ_DET LINE2R MIC2_JD FRONT_SENSE LINE2L LINE2_JD...

  • Page 22: Spdif Connector : Cn_Spdif1(Pitch 2.0Mm)

    R-102 Series User’s Manual 3.2.2 SPDIF Connector : CN_SPDIF1(Pitch 2.0mm) PIN NO. DESCRIPTION SPDIFO 3.2.3 Boot Up Mode Jumper : CN_AT1(Pitch 2.0mm) PIN NO. DESCRIPTION AT Mode ATX Mode...

  • Page 23: Front Panel Connector : Cn_Panel2 (Pitch 2.54Mm)

    Chapter 3 : Connectors 3.2.4 Front Panel Connector : CN_PANEL2 (Pitch 2.54mm) PIN NO. DESCRIPTION PIN NO. DESCRIPTION HDD LED+ Power LED+ HDD LED- RST- SPEAK+ PW_BN+ PW_BN- SPEAK-...

  • Page 24: Clear Cmos Jumper : Cn_Jrtc1(Pitch 2.54Mm)

    R-102 Series User’s Manual 3.2.5 Clear CMOS Jumper : CN_JRTC1(Pitch 2.54mm) PIN NO. DESCRIPTION CLEAR CMOS NORMAL...

  • Page 25: Cn_Jcom2_Sel2

    Chapter 3 : Connectors 3.2.6 COM2 RS232/422/485 Jumper : (Pitch 2.0mm) CN_JCOM2_SEL1 / CN_JCOM2_SEL2 CN_JCOM2_SEL1 CN_JCOM2_SEL2 CN_JCOM2_SEL1 RS232 RS485 RS422 9-11 9-11 8-10 10-12 10-12 CN_JCOM2_SEL2 RS232 RS485 RS422...

  • Page 26: Cn_Jcom2

    R-102 Series User’s Manual 3.2.7 COM1 / COM2 Voltage Setting Jumper : (Pitch 2.0mm) CN_JCOM1 / CN_JCOM2 CN_JCOM1 CN_JCOM2 CN_JCOM1 +12V CN_JCOM2 +12V...

  • Page 27: Com3~6 Connector : Cn_Com3~6(Pitch 2.0Mm)

    Chapter 3 : Connectors 3.2.8 COM3~6 Connector : CN_COM3~6(Pitch 2.0mm) CN_COM3~6 CN_COM3~6 PIN NO. DESCRIPTION PIN NO. DESCRIPTION HS_DCD(1~4)- HS_RXD(1~4) HS_TXD(1~4) HS_DTR(1~4)- HS_DSR(1~4)- HS_RTS(1~4)- HS_CTS(1~4)- HSRI(1~4)

  • Page 28: Com3~6 Voltage Setting Jumper : Cn_Jcom3~6 (Pitch 2.0Mm)

    R-102 Series User’s Manual 3.2.9 COM3~6 Voltage Setting Jumper : CN_JCOM3~6 (Pitch 2.0mm) CN_JCOM3~6 +12V 3.2.10 SPI Flash Connector : CN_SPI1 (Pitch 1.27mm) PIN NO. DESCRIPTION PIN NO. DESCRIPTION V3.3SPI -SPI HOLD0 CLK+...

  • Page 29: Lvds Voltage Jumper : Cn_ Jlvds1 (Pitch 2.54Mm)

    Chapter 3 : Connectors 3.2.11 LVDS Voltage Jumper : CN_ JLVDS1 (Pitch 2.54mm) Panel >=17” Panel <=15” +3.3V PS : +12V for large size panel : This request please tell us to modify before order. CN_JLVDS2 must open, RN15 use 0 ohm resistance to short. 3.2.12 PS2 KB/Mouse Connector : CN_PS1 (Pitch 2.0mm) PIN NO.

  • Page 30: Lvds Connector : Cn_Lvds1(Pitch 1.25Mm)

    R-102 Series User’s Manual 3.2.13 LVDS Connector : CN_LVDS1(Pitch 1.25mm) PIN NO. DESCRIPTION PIN NO. DESCRIPTION LCDVCC LCDVCC LCDVCC L DC7P L DC7N L CLK2P L CLK2N L DC6P L DC6N L DC5P L DC5N L DC4P L DC4N L DC3P L DC3N L CLK1P L CLK1N...

  • Page 31: Lvds Panel Type Select : Cn_Jlvds_Sel1(Pitch 2.0Mm)

    Chapter 3 : Connectors 3.2.14 LVDS Panel Type Select : CN_JLVDS_SEL1(Pitch 2.0mm) Open = 1, Short = 0 Panel Type 800x600 18bit 1024x768 18bit 1024x768 24bit 1280x768 18bit 1280x800 18bit 1280x960 18bit 1280x1024 24bit 1366x768 18bit 1366x768 24bit 1440x900 24bit 1440x1050 24bit 1600x900 24bit 1680x1050 24bit...

  • Page 32: Panel On/Off : Cn1(Pitch 2.0Mm)

    R-102 Series User’s Manual 3.2.15 Panel On/Off : CN1(Pitch 2.0mm) DESCRIPTION DESCRIPTION L PWRON 3.2.16 Digital I/O Connector : CN_DIO1(Pitch 2.0mm) DESCRIPTION DESCRIPTION GP10_IN0 GP14_OUT4 GP11_IN1 GP15_OUT5 GP12_IN2 GP16_OUT6 GP13_IN3 GP17_OUT7 V12S...

  • Page 33: Inverter Power Connector : Cn_Inv1(Pitch 2.0Mm) / Cn_Inv2(Pitch 1.25Mm)

    Chapter 3 : Connectors 3.2.17 Inverter Power Connector : CN_INV1(Pitch 2.0mm) / CN_INV2(Pitch 1.25mm) CN_INV1 CN_INV2 CN_INV2 CN_INV1 PIN NO. DESCRIPTION PIN NO. DESCRIPTION V12S BRIGHT BRIGHT INV_ON V5S (INV_ON) V12S V12S V12S...

  • Page 34: Parallel Port : Cn_Lpt1(Pitch 2.0Mm)

    R-102 Series User’s Manual 3.2.18 Parallel Port : CN_LPT1(Pitch 2.0mm) PIN NO. DESCRIPTION PIN NO. DESCRIPTION -PSTB AFD- PRD0 ERR- PRD1 INIT- PRD2 SLIN- PRD3 LPTGND PRD4 LPTGND PRD5 LPTGND PRD6 LPTGND PRD7 LPTGND ACK- LPTGND BUSY LPTGND LPTGND SLCT LPTGND...

  • Page 35: Mm)

    Chapter 3 : Connectors 3.2.19 USB Connector : CN_USB1(Pitch 2.0mm) / CN_USB2 / CN_USB3(Pitch 2.54mm) CN_USB3 CN_USB2 CN_USB1 CN_USB1 / CN_USB2 / CN_USB3 PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC (5V SB) VCC (5V SB) DATA0- DATA1- DATA0+ DATA1+...

  • Page 36: Smbus Connector : Cn_Smbus1(Pitch 2.0Mm)

    R-102 Series User’s Manual 3.2.20 SMBUS Connector : CN_SMBUS1(Pitch 2.0mm) PIN NO. DESCRIPTION SMBDATA SMBCLK 3.2.21 CPU / SYSTEM FAN Power Connector : CPUFAN1 / SYSFAN1 CPUFAN1 PIN NO. DESCRIPTION V12S P1FAN SYSFAN1 PIN NO. DESCRIPTION V12S CSFAN SYSFAN1 CPUFAN1...

  • Page 37: Sata Connector : Sata1~2

    Chapter 3 : Connectors 3.2.22 SATA Connector : SATA1~2 SATA1~2 PIN NO. DESCRIPTION...

  • Page 38: Atx / Dc In Power Connector : Atx1 / Dc_In1

    R-102 Series User’s Manual 3.2.23 ATX / DC IN Power Connector : ATX1 / DC_IN1 “ATX1” and “DC_IN1” can input power at the same time (Dual Power Input), ATX1 will have first priority. When use “DC_IN1” insert power adapter only, ATX1 can insert ATX power cable to supply power for SSD or HDD.

  • Page 39: External Peripheral Interface Connector Panel

    Chapter 3 : Connectors 3.3 External Peripheral Interface Connector Panel AUDIO_JACK1 COM1 RJ45_1 RJ45_2 CN_IN1 USB_1 USB_2 COM2 3.3.1 Ethernet and USB 2.0 Connector The R-102 is equipped with two built-in RJ-45 Ethernet controllers. Each controller can connect to the LAN through one RJ-45 LAN connector. (R-102L-XX series : RJ45_1 only) The RJ-45 Ethernet connector has two status LEDs, one green and one yellow.
  • Page 40 R-102 Series User’s Manual RJ45_2 PIN NO. DESCRIPTION PIN NO. DESCRIPTION L18VSB2 MDI10+ MDI10- MDI11+ MDI11- MDI12+ MDI12- MDI13+ MDI13- LAN2GND RACTLED1- RLINK1 RLINK1H1- RLINK1G1- ACT/LINK SPEED Activity/Link LED SPEED LED Status Description Status Description No Link 10Mbps connection Blinking Data Activity Orange 100Mbps connection...

  • Page 41: Serial Port Connector : Com1 / Com2

    Chapter 3 : Connectors 3.3.2 Serial Port Connector : COM1 / COM2 COM1 / COM2 PIN NO. DESCRIPTION PIN NO. DESCRIPTION DATA CARRIER DETECT RECEIVE DATA (RXD) (DCD#) TRANSMIT DATA (TXD) DATA TERMINAL READY (DTR#) DATA SET READY (DSR#) REQUEST TO SEND CLEAR TO SEND (CTS#) (RTS#) RING INDICATOR (RI#)

  • Page 42: Display Connector : Crt / Dvi

    R-102 Series User’s Manual 3.3.3 Display Connector : CRT / DVI PIN NO. DESCRIPTION PIN NO. DESCRIPTION GREEN BLUE 5VCDA 5HSYNC 5VSYNC 5VCLK PIN NO. DESCRIPTION PIN NO. DESCRIPTION TMDS_TX2- TMDS_TX2+ DVI_SL DVI_DA TMDS_TX1- TMDS_TX1+ TMDS_TX0- TMDS_TX0+ TMDS_TXC+ TMDS_TXC-...

  • Page 43: Audio Connector : Audio_Jack1

    Chapter 3 : Connectors 3.3.4 Audio Connector : AUDIO_JACK1 LINE IN LINE OUT The audio jacks connect to external audio devices. 　 Line In port (Light Blue): Connects to a CD/DVD player or a musical instruments.. Line Out port (Lime): Connects to a headphone or a speaker. With multi-channel configurations, this port can also connect to front speakers.

  • Page 44: Chapter 4 : Installation

    R-102 Series User’s Manual Chapter 4 : Installation 4.1 Before Installation For installation, you may need tool (screwdriver). Users must follow these guidelines to ensure the motherboard is protected during installation. Make sure your computer is powered-off whenever work in with inside components.

  • Page 45: Install The So-Dimm Ddr3 Ram

    Chapter 4 : Installation 4.2 Install the SO-DIMM DDR3 RAM Step 1: Locate the SO-DIMM socket. Place the board on an anti-static mat. Step 2: Align the SO-DIMM with the socket. Align the notch on the memory with the notch on the memory socket. Step 3: Insert the SO-DIMM.

  • Page 46: Install The Sim Card

    R-102 Series User’s Manual 4.3 Install the SIM card Step1 : Follow arrow direction, slide the cap toward OPEN. Step2 : Make sure that the cap is now at the OPEN position. Step3 : Flip the cap up for inserting a SIM card into.
  • Page 47 Chapter 4 : Installation Step4 : Insert a SIM card as shown in the photo. Be sure that the corner cut is on top and the golden pads are up. Step5 : Flip down the cap, press down and slide the cap to the CLOSE position.

  • Page 48: Install The Mini Pci-E Card

    R-102 Series User’s Manual 4.4 Install the Mini PCI-E card Step 1: Align the mini pci-e card with the socket. Align the notch on the mini pci-e card with the notch on the mini pci-e socket. Step 2: Seat the MINI PCI-E card. Gently push downwards and the arms clip into place.

  • Page 49: Chapter 5 : Bios Setup

    Chapter 5 : BIOS Setup Chapter 5 : BIOS Setup 5.1 APM : The APM is for setting power on date/time. When power on press < F2 > into Phoenix SecureCore Tiano setup. Move to [ Others -> APM Configuration ], press Enter. 5.2 Programming Watch Dog Timer : The watchdog timer makes the system auto-reset while it stops to work for a period.

  • Page 50: Power Loss

    R-102 Series User’s Manual 5.3 Power Loss : The power loss is boot up mode selection by firmware (Jumper CN_AT1 is hardware) Always on = AT mode (auto boot up), Always off = ATX mode (boot up by power button). Move to [ Others -> SIO Configuration -> PowerLoss ] , press Enter.

  • Page 51: Flash Bios

    Chapter 5 : BIOS Setup 5.4 Flash BIOS : 5.4.1 Flash Tool The board is based on Phoenix BIOS and can be updated easily by the BIOS auto flash tool. File name of the tool is “pflash.exe”, it’s the utility that can write the data into the BIOS flash ship and update the BIOS.

This manual is also suitable for:

R-102-n8R-102-n6

Table of Contents