Connecting The Speakers To The Amplifier; Connecting One Pair Of Speakers - Bose SoundTouch SA-5 Owner's Manual

Connecting the speakers to the amplifier

After you place your speakers, connect the speaker wires to the amplifier. See
"Installation guidelines" on page 10.
Speaker wires consist of two insulated wires:
• The marked wire (stripes, ribbing or color) connects to the positive (+) terminal.
• The plain wire connects to the negative (–) terminal.

Connecting one pair of speakers

To connect two pairs of speakers, see page 13.
1.
Make sure the amplifier is not plugged into an AC (mains) power source.
2. Remove a terminal block connector from the SPEAKERS OUT
connector.
3. Connect the speaker wires:
A. Insert the left speaker's marked wire into the
the plain wire into the
B. Insert the right speaker's marked wire to the
and the plain wire to the
4.
Secure the wires into the terminals using a small, flat-head screwdriver to
tighten the screws on the terminals
Setting up the System
L –
negative terminal.
R –
negative terminal.
+ L
positive terminal and
+ R
positive terminal
English - 11