Replacing The Speakers; Procedure; Post-Requisites - Dell Inspiron 24 3000 series Service Manual

Replacing the speakers

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Using the alignment posts and rubber grommets on the display bezel,
place the speakers on the display bezel.
2 Route the speaker cable through the routing guide on the display bezel.
3 Adhere the tape that secures the speaker cable to the VESA-mount
bracket.
4 Replace the screw to the VESA-mount bracket.
5 Replace the rubber grommets if they are pushed up while replacing the
speakers.
6 Route the speaker cable connecting the left speaker to the right speaker
on the display-panel base.
7 Route and replace the speaker cable under the VESA-mount bracket.
8 Connect the speaker cable to the system board.

Post-requisites

1 Replace the speaker
2 Replace the back
3 Replace the stand
64
computer. After working inside your
cover.
cover.
assembly.
After working inside your