Surround System Options - Meridian DSP5000C User Manual

Dsp centre-channel loudspeaker

Hide thumbs Also See for DSP5000C:

Technical specifications (2 pages)

User manual (49 pages)

User manual (73 pages)

Table Of Contents

Table of Contents

System protocols

Multiroom systems have protocols which allow you to define the extent to

which any room can interfere with the main system. You can choose to

have the DSP5000C ignore the Standby state of the associated

preamplifier, looking after its own Standby independently. To select this

mode while in the system menu:

1. Press Fn - Record

The display should indicate 'preamplifier off' like this:

Toggle this choice with Fn - Record.

Setting the Volume mode

1. Press the menu e e key

LE.

In the 500 Comms system there is provision for two volume controls, main

and secondary.

2. Use the

and

menu keys to choose between:

1. Volume main means that the DSP5000C volume control will

follow the main system and respond to the red keys on the remote.

Shifted (secondary) volume commands will be passed on to

another product. (Equivalent to the VolM setting in 562 and 501.)

2. Volume secondary means that the internal volume control will

follow the second volume control in the system and respond to the

shifted volume command on the remote. (Equivalent to the VolS

setting in 562 and 501.)

3. Volume is handled in the speaker independently of other

products on the Comms. (Equivalent to the VolN setting in 562 and

501.)

Options 2 and 3 are for Multiroom installations. If in doubt select 1.