Before The First Use; Selecting The Functions - Oster BVSTKT5970 Instruction Manual

BEFORE THE FIRST USE

1. Wash the inside of the kettle and lid with mild detergent and water. Rinse each
thoroughly. Do not immerse the kettle or power base in water or any other liquid.
These items are not dishwasher safe.
2. Fill the electric kettle with fresh water to the "MAX" water level mark on water
window. Boil the water, following the directions below for use of your kettle.
3. When the water and unit have cooled, discard the water. Rinse with cold water and
repeat.
4. Your electric kettle is now ready for use.
OPERATING INSTRUCTIONS
1. Position the power base on a flat, heat resistant surface, as close as possible to a
power outlet.
2. Follow cord routing in power base according to exit patterns. Proper cord routing will
result in the power base laying flat when kettle is placed in base. DO NOT operate
kettle if power base is not flat. If power base is not flat, remove kettle from power
base and repeat cord placement instructions.
3. To fill with water, open lid. Fill the electric kettle with water below the "MAX" water
level mark. NOTE: Do not exceed the "MAX" water level mark indicated on the
electric kettle.

SELECTING THE FUNCTIONS

The kettle's default function is Boil, however you can select the desired function as
follows:
MATÉ
This function was designed to heat the water at the ideal temperature to prepare maté
with the touch of a button.
1. Plug the electric cord into the appropriate electrical outlet.
2. Select the maté function by pushing the function button "
highlighted in the digital display (see figure 1).
figure 1
English - 4
" until the maté icon is