Midi Latency Modes - American Audio VMS4 Instruction Manual

Professional digital producer

Hide thumbs Also See for VMS4:

Table of Contents

MIDI

ATENCY

ODES

There are two MIDI Latency modes: Normal mode and Turbo mode.

• Normale mode has MIDI Latency of 10 ms, this is the default mode.

• Turbo mode has a MIDI latency of 1 ms.

To set the VMS4™ to Turbo mode:

• Before powering on press and hold the CUE, PLAY and PAUSE buttons on the left side.

• Hold the buttons until Channel Volume Level Indicators (7) light up with the code version. See above Channel Volume Level Indicators (7)

for information on the code version.

It is recommended that you use the default mode if your computer does not meet the recommended system requirements or are using Windows

Vista. It is also strongly recommended that you close all programs running in the background, this will free up RAM and minimize CPU process. If

you are using a laptop, turn off your wireless card if possible since this may cause sound problems. Allow your computers hard drive to have at

least 20% free space.

VMS4™

Instruction Manual Page 42

Table of Contents