Asus DELUXE A7N8X-E User Manual page 43

7. ATX power connectors (20-pin ATXPWR1)
This connector connects to an ATX 12V power supply. The plugs from
the power supply is designed to fit this connectors in only one
orientation. Find the proper orientation and push down firmly until the
connector completely fits.
Make sure that your ATX 12V power supply can provide 8A on the
+12V lead and at least 1A on the +5-volt standby lead (+5VSB). The
minimum recommended wattage is 300W, or 350W for a fully
configured system. The system may become unstable or may not boot
up if the power is inadequate.
A7N8X-E
®
A7N8X-E ATX Power Connector
ASUS A7N8X-E Deluxe motherboard
ATXPWR1
+3.3VDC +3.3VDC
-12.0VDC +3.3VDC
COM COM
PS_ON# +5.0VDC
COM COM
COM +5.0VDC
COM COM
-5.0VDC PWR_OK
+5.0VDC +5VSB
+5.0VDC +12.0VDC
2-23