Asus DELUXE A7N8X-E User Manual page 42

5. CPU, Power and Chassis Fan Connectors
(3-pin CPU_FAN1, PWR_FAN1, CHA_FAN1)
The fan connectors support cooling fans of 350mA~740mA (8.88W
max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan
cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Lack of
sufficient air flow within the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on
the fan connectors!
A7N8X-E
®
A7N8X-E 12-Volt Cooling Fan Power
6. Serial Port connector (10-1 pin COM2)
This connector accomodates a second serial port using a serial port
bracket. Connect the bracket cable to this connector then install the
bracket into a slot opening at the back of the system chassis.
A7N8X-E
®
A7N8X-E Serial COM2 Bracket
The serial port bracket is purchased separately.
2-22
CPU_FAN1
Rotation
+12V
GND
PWR_FAN1 CHA_FAN1
COM2
PIN 1
Chapter 2: Hardware information