Assembly Instructions; Features; Control Panel - Battery Extender SP1-CA Owner's Manual

9.

ASSEMBLY INSTRUCTIONS

9.1
Remove all cord wraps and uncoil the cables prior to using the battery charger.

10. FEATURES

11. CONTROL PANEL

LED DISPLAY
CLAMPS REVERSED (red) LED flashing: The connections
are reversed.
CHARGING (yellow/orange) LED lit: The charger is charging
the battery.
CHARGING (yellow yellow/orange) LED flashing: The charger
is in abort mode.
CHARGED (green) LED pulsing: The battery is fully charged and the
charger is in maintain mode.
NOTE: See the Operating Instructions section for a complete description of
the charger modes.
1
4
3
1. Battery status LEDs
2. Battery clamps (quick-connect)
3. Ring connectors
(quick-connect)
2
4. 12V accessory plug
(quick-connect)
• 7 •