Hisense 75T910UAD User Manual page 18

The LAN Port on the Wall
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol
(DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so
you don't have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet
mask, gateway, and DNS values manually on your TV's Cable Setup Screen when you set up the network connection. To get
the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
NOTE
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support
DHCP also let you use Static IP addresses.
IP address - Display the current IP address.
Ethernet MAC address - Display Ethernet MAC address.
Proxy & IP settings
Proxy settings: You can select None or Manual. If the
network requires a Proxy setting, select Manual and then
enter the Proxy hostname, Proxy port and Bypass proxy
to connect to the network manually.
Bluetooth
You can use Bluetooth to communicate between the TV
and other Bluetooth devices.
Bluetooth - Enable/disable Bluetooth feature.
Find nearby devices - Scan for and display the available
Bluetooth devices in range.
Press the [▲/▼] buttons to select the desired Bluetooth
device, and then press the [OK] button to pair.
Device name - Change the Bluetooth device's name of
your TV. New name will be displayed when other Bluetooth
devices scan for it.
Basic Features
LAN Cable
IP settings: You can select DHCP or Static.
DHCP(Dynamic Host Configuration Protocol):
Configure the network connection that supports DHCP
automatically.
Static: Enter the IP Address, Gateway, Network prefix
length, DNS1 and DNS2 values to connect to the
network manually, if the network requires a static IP
address.
Status & Others
Check the network information.
Anyview stream switch - Enable/disable DLNA feature.
Anyview cast - Display other terminal devices, such as
your smart phone or tablet. Push the screen of your mobile
device to display on your TV.
Network diagnostic tool - Launch network diagnostic tool.
16
LAN Port on TV
LAN