Hisense 75T910UAD User Manual page 12

Turning your TV on and off
To turn your TV on: Connect the TV to an AC power
outlet and an external antenna, then turn on the power
via the switch located below the front right-hand side of
unit.
Turning off to standby mode: Press [
RHS panel or the remote control to switch to standby
mode. You can activate the unit again by pressing [
WARNING
• When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the power
cord.
Pairing the Remote
The air mouse and voice search functions are available
after the remote control is paired.
The First Method
The Setup Wizard menu appears the first time you turn
on the TV. For remote pairing, press and hold the
button and the [0] button simultaneously until the red
LED turns on. When the red LED lights, release the
buttons and wait for the TV to pair with the remote. The
blue LED on the remote control will flash three times
when the pairing is successfully completed.
The Second Method
1. Enter Settings > Bluetooth to turn on Bluetooth.
2. Press and hold the
seconds simultaneously.
3. Select Find nearby devices to search for the remote
control, and the remote control will appear in the list of
the available devices. Press [▲/▼] buttons to select the
remote control and press the [OK] button to pair.
Using the Air Mouse
For using the TV conveniently, the remote control
supports the air mouse function.
Enable the air mouse: Shake the remote control to
activate the air mouse. You can control the mouse via the
wrist movement.
Using the Remote Control
] on the back
+
button and the [0] button for three
Use the air mouse: You can press the [OK] button to
achieve the single-click operation on the mouse.
Disable the air mouse: Press any direction buttons
(▲/▼/◄/►) to turn off this function.
Using the Voice Search
].
The TV allows you to find TV programmes and movies,
launch apps, log in to webpages, and complete other
operations using the voice search function.
Enable voice search: Press the
Search and then say the command word/phrase 10cm to
15cm away from the MIC on the remote control.
Set voice search: To set Voice Search, go to Setting >
Sound > Voice search and voice recognition.
NOTES
• Please connect to the network and Bluetooth before
using the voice search function.
• Voice Interaction is limited to the official language of the
country of purchase.
• The voice recognition rate varies depending on the
volume/tone, pronunciation, and ambient environment (TV
sound and ambient noise).
Live TV
Us e Li v e T V to v i e w th e p r o gr a mme g ui d e a nd
programme information more easily. You can also book
programmes, record programmes, remove channels from
the channel list, and designate favourite channels for a
more convenient TV viewing experience.
1. Press the [Live TV ] button to the Live TV interface or
enter the current Select Device that you seleted in Video
Input (press the
and select Video Input).
2. Press the [CH +/CH - ] buttons to go to the next or
previous channel. Or, press the number buttons to select
a channel. For example, to select channel 12, press [1],
then press [2].
3. Press the [▼] buttons to display the information of the
current channel.
101.802
Fox Sports Network
Aug 12 2014 11:35
The Programme Info may vary depending on the type of
incoming signal and may not be available at all for certain
programmes.
4. Press the
grammes.
10
button to run Voice
button to diaplay the Setting menu
11:35 AM 11.55 AM
Spring Festival Gala Evening
12:05-12:55 It's made by a company called Discovery
button to view the recent viewed pro-
1080i 4:3 DTV TTX Hbbtv PG-16
1/4 Eng Sub.T Dolby