Fine Tuning - Meridian G68 Installation Manual

3 8
C a l i b r a t i n g
t h e s y s t e m
• Use
layout.
The display shows the speaker being tested, and the distance:
• Use
• You can press Units to change between feet/inches and metres.
Repeat this for each of the speakers in your layout.
• Press

Fine tuning

These tests allow you to fine-tune the phase and delay of each
speaker when used in conjunction with other speakers on the
layout.
• Use
layout.
The first display allows you to adjust the phase. For example:
and to move between each of the speakers in the
Press More for help
Left Distance 18'0
Units ìî ïñ óòô
and to change the distance.
to proceed to the next calibration stage.
and to move between each of the speakers in the
Press More for help
Left Phase
ìî ïñ óòô
The next display shows the distance for the same speaker. For
example:
• Choose the correct setting as follows:
öõú
Setting
Correct
Incorrect
Pay particular attention to the centre channel, as this can have a
dramatic effect on the overall sound.
• Press to proceed to the next calibration stage.
+
öõú
Press More for help
Left Distance 18'0
ìî ïñ óòô öõú
What it sounds like
The sound between the speakers is very even, and
does not change radically as you move your head.
The sound appears diffused, and changes in timbre
and apparent location as you move your head.