3 6
C a l i b r a t i n g
t h e s y s t e m
To start the calibration procedure
Either:
• Press Next on the last option of configuring settings; see page
32.
Or:
• Press On/Off to put the digital surround controller into standby.
• Press More.
If the product is locked the display shows:
• Press Unlock.
The display shows:
• Press Calib.
The displays shows Please wait....
After a few seconds the display shows the first calibration test:
Version
Unlock
Calib Lock
Press More for help
Left
Level
+0.0dB
ìî
ïñ
óòô
öõú
For more detailed information about this and the other calibration
tests see the following sections.
To exit from the calibration procedure
You can exit from the calibration procedure at any time, and any
parameters you have set will be retained:
• Press On/Off.
To complete the calibration procedure
When you reach the end of the calibration procedure the following
display confirms that you have completed the calibration of the
system:
Calibration complete.
Back
Next
• Press Restart to restart the calibration procedure, or Next to
complete the wizard.
The display shows:
Press More for help
Wizard complete
Back
Exit
Either:
• Press Exit to return to standby.
Or:
• Press Restart to return to stage 1; see page 26.