Toshiba e-STUDIO305CP Printing Manual page 88

2 PRINTING FROM WINDOWS
2) Option
This option sets whether the following optional devices are installed.
The options that you can set vary depending on the models.
Drawers
This sets the installation of drawers according to the configuration.
- Drawer1 — Select this when only Drawer 1 is installed.
- Drawer 1 & LCF — Select this when Drawer 1 and the Large Capacity Feeder are installed.
- Drawer 1 & Drawer 3 — Select this when Drawers 1 and 3 are installed.
- Drawer 1 & Drawer 3, 4 — Select this when Drawers 1, 3 and 4 are installed.
- Drawer 1 & Drawer 2 — Select this when Drawers 1 and 2 are installed.
- Drawer 1, 2 & Drawer 3 — Select this when Drawers 1, 2 and 3 are installed.
- Drawer 1, 2 & Drawer 3, 4 — Select this when Drawers 1, 2, 3 and 4 are installed.
- Drawer 1, 2 & LCF — Select this when Drawers 1, 2 and the Large Capacity Feeder are installed.
The Large Capacity Feeder is not available for some countries or regions.
3) Finisher
This sets whether or not the Finisher is installed.
- None — Select this when a Finisher is not installed.
- Hanging Finisher — Select this when a Hanging Finisher is installed.
- Finisher — Select this when a Finisher is installed.
- Inner Finisher — Select this when an Inner Finisher is installed.
- Saddle Stitch Finisher — Select this when a Saddle Stitch Finisher is installed.
- Job Separator — Select this when a Job Separator is installed.
- Offset Tray — Select this when a Offset Tray is installed.
4) Hole Punch Unit
This sets whether or not the Hole Punch Unit is installed.
- None — Select this when a Hole Punch Unit is not installed.
- 2 Holes — Select this when a 2 Hole Punch Unit is installed.
- 2/3 Holes — Select this when a 2/3 Hole Punch Unit is installed.
- 4 Holes (F) — Select this when a 4 hole (F) punch unit is installed.
- 4 Holes (S) — Select this when a 4 hole (S) punch unit is installed.
5) External LCF
This sets whether or not the External Large Capacity Feeder is installed.
- None — Select this when an External Large Capacity Feeder is not installed.
- External LCF — Select this when an External Large Capacity Feeder is installed.
6) Inserter Unit
Select this check box when the Inserter Unit is installed.
This setting is selectable only when [Universal] is selected in the [Model] box.
7) Automatic Duplexing Unit
Select this check box when the Automatic Duplexing Unit is installed.
This setting is selectable only when the model below is specified in the [Model] box.
- e-STUDIO2551C Series
86 Setting Up Print Options