Toshiba e-STUDIO305CP Printing Manual page 52

2 PRINTING FROM WINDOWS
5) Hole Punch
This sets whether a print job is printed with hole punches. Select the hole punch position.
- Off — Select this not to punch holes.
- Center Top — Select this to create holes along the top edge and print.
- Middle Left — Select this to create holes along the left side and print.
 Hole punching can be selected only when a Hole Punch Unit is installed.
 The "Hole Punch" option is not available when the Magazine sort function is selected.
 The selectable options vary depending on the paper size.
For the detailed instructions on how to print with the [Hole Punch] setting, see the following page:
 P.118 "Hole punching"
6) Folding
Select this option if you want to have the printed paper folded when it exits. The job is printed according to
the other print options set, and then exits with its center folded.
- Off — Select this not to fold the printed paper.
- Folding — Select this to fold the printed paper at the center.
The Folding option is used when the Booklet option is selected in advance. If you apply the Booklet
option in a normal page order, select [Booklet] in the [2-Sided Printing] box.
If you apply the Folding option, set [Booklet] in the [2-Sided Printing] box, click [Details], open the
[Booklet Details] dialog box and then select the [Folding] check box.
The "Folding" option is available only when the Saddle Stitch Finisher is installed in any of the following:
- e-STUDIO6570C Series
- e-STUDIO6550C Series
- e-STUDIO4540C Series
- e-STUDIO507 Series (only when the MJ-1108 is installed)
- e-STUDIO456 Series (only when the MJ-1106 is installed)
- e-STUDIO5055C Series
For detailed instructions on how to print with the Folding option, see the following page:
 P.113 "Making a booklet"
50 Setting Up Print Options