Wireless Display; Bluetooth Connectivity; Other Information; Connecting To Your Mobile Device Via Wifi - Haier LEF65V200S Operating Instructions Manual

If the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via the
navigation buttons and the OK button on the remote
control.
Wait until the IP address is shown on the screen.
This means that the connection is now established. To
disconnect from a wireless network, highlight Network
Type and press OK.
You can navigate between menu tabs by pressing
left/right buttons. The help bar on the bottom of the
dialog shows features that you may use. Press the
Blue button to check your internet connection speed.
Press the Green button to switch to advanced mode
and then press the OK button to edit settings.

Other Information

Configuration Status: Displays Wi-Fi status as
Connected or Not Connected.
IP Address: Displays the current IP address.
Network Name: Connected networks' name will be
displayed.
Delete Saved Wi-Fi Profiles
Saved profiles will be deleted if you press the Red
button while the wireless device selection OSD is
on the screen.

Connecting to your mobile device via WiFi

• If your mobile device has WiFi feature, you can
connect it to your TV via a router, in order to access
the content in your device. For this, your mobile
device must have an appropriate sharing software.
• Connect to your router following the steps stated
above in the Wireless Connectivity section.
• Afterwards, engage your mobile device with the
router and then activate the sharing software on
your mobile device. Then, select files that you want
to share with your TV.
• If the connection is established correctly, you will
be able to access the shared files from your mobile
device via the Media Browser of your TV.
• Enter the Media Browser menu and the playback
device selection OSD will be displayed. Select your
mobile device and press the OK button to continue.
• If available, you can download a virtual remote
controller application from the server of your mobile
device application provider.
Note: This feature may not be supported on all mobile
devices.

WIRELESS DISPLAY

Wireless Display is a standard for streaming video and
sound content by Wi-Fi Alliance. This feature provides
the ability to use your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV.
Plug the wireless USB dongle to TV first, if the TV
doesn't have internal WiFi feature.
Then press the Source button on the remote and
switch to Wireless Display source.
A screen appears stating that the TV is ready for connection.
Open the sharing application on your mobile device.
These applications are named differently for each
brand, please refer to the instruction manual of your
mobile device for detailed information.
Scan for devices. After you select your TV and
connect, the screen of your device will be displayed
on your TV.
Note: This feature can be used only if the mobile device
supports this feature. Scanning and connecting processes
differ according to the programme you use. Android based
mobile devices should have the software version V4.1.2
and above.

Bluetooth Connectivity

Your TV supports Bluetooth technology. A pairing
is required before using the Bluetooth devices with
the TV set. You should do the followings to pair your
device with the TV:
*Set the device to pairing mode
*Start device discovery on the TV
Note: Refer to the user manual of the Bluetooth device to
learn how to set the device to pairing mode.
You can connect audio devices or remote controllers
via Bluetooth to your TV. For audio devices you should
use the Audio Link option in the System>Sound
menu, for remote controllers the Smart Remote
option in the System>Settings>More menu. Select
the menu option and press the OK button to open
the related menu. Using this menu you can discover
and connect the devices that use Bluetooth wireless
technology and start to use them. Follow the on-
screen instructions. Start the device discovery. A list
of available bluetooth devices will be displayed. Select
the device you want to connect from the list and press
the OK button to connect. If "Device connected"
message is displayed, the connection is successfully
established. If the connection fails try it again.
Note: Bluetooth and Wireless LAN devices operate within
the same radio frequency range and may interfere with one
another. To improve the performance of your Bluetooth device
place it at least 1 meter away from any other Bluetooth or
Wireless LAN devices.
English - 42 -