To Use The Parallel Line; To Move The Center Of Own Ship; To Measure The Distance And Bearing To The Target - Samyung SMR-3700 Manual

4.3.11. To use the parallel line

Length-parallel line for distance and
width-paralled line for bearing are
shown as one line at PPI screen and
the bearing & distance for the
between paralled lines are marked in
the top-left of the screen.
button can adjust the parallel lines
bearing.
button can adjust the distance of the
parallel line.
4.3.12. To move the center of own
ship
 It can use for securing the wider sight to the
specific direction from the center of own ship.
Shows "+" cursor in a center of PPI
screen.
Move the cursor to a desirable
position.
The center of own ship moves to the
position of the cursor.
Return to the original position.
[ Ref. ] ☞ To the foreward and afterward direction,
80% of screen can be moved while 60% of screen
can be moved to the reft and right side.
4.3.13. To measure the distance and
bearing to the Target
a) Use
EBL means Electronic Bearing Line.
VRM means Variable Range Maker.
b) Use button.
c) Use button.
(1) How to measure the distance & bearing
for targets by using EBL/VRM function
VRM & EBL are shown from the
center of the PPI screen.
Values for bearing & distance are
shown at the bottom-left of the
screen.
Able to adjust EBL.
Able to adjust VRM.
Function is end.
(2) Press button.
 The method of adjustment is same as
'1 EBL/VRM'.
button.
(3) How to measure bearing & distance from
a target to target by using F EBL/VRM
function.
VRM & EBL are shown at the top-
right of the PPI screen.
Shows Press ENT to set on a
screen and a cursor and values for
distance & bearing are shown at the
bottom-left of the screen. CRS Data
is shown with the distance & bearing
of the cursor based on the position
of own ship.
Move the cursor to a desirable
position.
EBL & VRM is moved.
Function is end.
(4) The purpose to use '1 EBL/VRM' ,
'2 EBL/VRM' functions both
a) Two different colored EBL and VRM appears on
the Screen.
b) Use for measuring distance/ bearing for more
than one target.
c) It displays Function key which is currently
using at 1 2 F on the left bottom of screen.
d) For termination, you may press the currently
using function key once more.
[ Ref. ] ☞ '1 EBL/VRM' , '2 EBL/VRM' in case of
using the functions both, in case of using 'F
EBL/VRM' function , '2 EBL/VRM' function is
disappeared and '1 EBL/VRM' & 'F EBL/VRM'
functions can be available.
(5) How to measure the distance & bearing
for targets by cursor funtion.
Distance/Bearing value along with
CSR display appears on the right
bottom of screen.
Cursor / Data is disappeard.
(6) Press Parallel line key.
 Please refer to how to use '4.3.11. To use the
parallel line'.
17