Wireless Connectivity; Restore To The Factory Default Settings - ASROCK AC2600 G10 User Manual

for your computer's MAC address, do one of the following:
- Inform your ISP that you bought a new network device and ask them to use the
router's MAC address.
- Configure your router to clone your computer's MAC address.

8.6 Wireless Connectivity

If you are having trouble to connect wireless to the router, try to isolate the problem:
Does the wireless device or computer that you are using find your wireless network?
• If you disable the router's SSID broadcast, then your wireless network will be
hidden and will not be displayed in your wireless client's scanning list.
• If not, check the dashboard Wi-Fi on/off button from the Web GUI. If it is
off, you can press the Wi-Fi on/off button on the dashboard to turn the router
wireless radios back on.
If your wireless device finds your network but the signal strength is weak, check
these conditions:
• Is your router too far from your computer or too close? Place your computer
near the router but at least 6 feet away and see whether the signal strength
improves.

8.7 Restore to the factory default settings

You can return the router to its factory settings. Use the end of a paper clip or a
similar object to press and hold the Reset button on the back of the router for at
least ten seconds.
Go to Advanced > Administration > Restore/Save, and press "Restore".
50