ASROCK AC2600 G10 User Manual page 53

5. Tap "LEARN".
The LED indicator on the front of the
router will be flashing light blue.
6. Now point your remote controller
directly to the front panel of your G10
router (within 10 cm) and press the
button on your remote controller. If
the signal is successfully learned, the
front LED indicator will turn into
solid light blue.
7. You can tap "TEST" to check if the
command is copied.
Tap "LEARN"
8. Tap "SAVE" to save the setting.
Tap "CLEAR" to clear the learned
command.
9. Now you can use your mobile device
to remotely manipulate your router to
control your home appliances.
46
Learning
Done
(About 15 secs)
(About 5 secs)
OR
Failed
(Flashes twice)