Remote Control - JVC LT-19HA72U Operating Instructions Manual

Installation
Front panel
2
1: Remote Control Sensor.
2: Power Indicator LED:
RED STANDBY.
3: Side buttons
REAR AV Connections
COAXIAL OUTPUT
All the terminals are(from left to right):YPbPr INPUT,VIDEO,AUDIO INPUT,COAXIAL OUTPUT,SCART.
Note: VIDEO and YPbPr share one audio channel.
REAR AV Connections(SIDE)
All the terminals are(from left to right):
USB, HDMI2, HDMI1(ARC), HEADPHONE, CI, PC AUDIO, VGA, RF.
Note: 1.When HDMI port gets DVI signal ,the audio signal is received from the PC Audio channel.
2.Insert the plug of the earphone into the headphone jack on the unit.
The speakers are then muted.
KEYBOARD
3
1
1. SOURCE: Displays the input source menu;
press repeatedly to move down the menu and
press "VOL-" or "VOL+" to select the required
30 30
source.
2. MENU: Display main MENU.
FREEZE
3. CH+/CH-: In TV mode, press "CH+" or "CH-" to
EPG
change the channel up and down. In MENU mode,
VOL CH
press "CH+" or "CH-" to select items.
mode, press "CH+" or "CH-" to turn on the TV.
4. VOL+/VOL-: Adjust sound level. In MENU mode,
press "VOL+ " or "VOL- " to adjust the item that
you selected.
5. STANDBY: Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBY.
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
In standby
EN
9