Table of Contents
Advertisement
Practical hints
Replacing bulbs
High beam/ high beam flasher bulbs
Press ends of headlamp cover tab to-
gether and remove high beam head-
lamp cover 2.
Pull the electrical connector off.
Turn locking mechanism 5 counter-
clockwise and take out the bulb.
Insert the new bulb so that the base lo-
cates in the recess on the holder.
Turn locking mechanism 5 clockwise.
Plug the connector onto the bulb.
Align high beam headlamp cover 2
and click it into place.
384
Parking and standing lamp bulbs
Press ends of cover tab together and
remove high beam headlamp cover 2.
Pull out bulb socket 6 with the bulb.
Pull the bulb out of bulb socket 6.
Insert a new bulb in bulb socket 6.
Reinstall bulb socket 6.
Align high beam headlamp cover 2
and click it into place.
Side marker bulbs
Carefully slide the side marker lamp to-
wards rear.
Remove the front end first.
Turn the bulb socket counterclockwise
and pull it out.
Pull the bulb out of the bulb socket.
Insert the new bulb in socket.
Reinstall the bulb socket, push it in,
and turn it clockwise.
To reinstall the side marker lamp, set
the rear end in bumper and let the front
end snap into place.
Advertisement
Table of Contents
