Controls in detail
Control system
Which messages will appear in the right
multifunction display depends on whether
your telephone is switched on or off:
If the telephone is off, the message in
the multifunction display is:
If the telephone is on:
The telephone will then search for a
network. During this time the right dis-
play is empty.
As soon as the telephone has found a
network,
is indicated in the right
READY
display.
This standby message indicates that
your telephone is ready for use and you
can operate it using the control sys-
tem.
162
Rejecting a call
If you do not wish to receive the call, you
can choose to reject it.
Press button ì.
TEL Off
.
You have rejected the call. The caller
receives a busy signal.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the right display you will then see the mes-
sage:
Press button í.
You have answered the call. In the right
display you see the length of the call.
Ending a call
Press button ì.
You have ended the call. In the right
display you will again see the standby
message.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
Press button ÿ or è repeatedly
until you see the
menu in the left
TEL
display.
In the right display you will see the
standby message.