Faqs - Vax VX37 User Manual

FAQs

Warning:
To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks.
Problem
Vacuum will not run. • Not plugged in properly.
• No electricity in wall outlet.
• The Brushroll is blocked.
Vacuum does not • Did the vacuum shutdown on very
pick up. dense material or large obstruction,
and did the lights ash?
• Disposable Inner Bag is full.
• Nozzle or intake pivot clogged.
• Brush is worn.
• Bag tube clogged.
• Bag pores are clogged with ne dust.
• Impeller fan is broken.
• Brushroll is not even at both ends.
Vacuum still does not • Check all the above points.
operate properly.
Unit stops and front • Jammed brushroll
lights ash.
All accessories and replacement parts are sold separately. To order contact us
13
Check
Please have your model number from the rating label located on the machine.
What To Do
• Be sure power cord is rmly plugged into wall outlet.
• Check electrical source (fuse or circuit breaker).
• Clear blockage. Unit will reset. (See page 12.)
• See steps on clearing an obstruction on page 12. Turn the unit o
and wait 5 seconds and vacuum will reset. You can also unplug
unit and vacuum will reset.
• Replace Disposable Inner Bag. (See page 7-8.)
• Clear blockage. (See page 12.)
• Contact us on AU: 1300 361 505 / NZ: 0800 800 900
• Clear blockage. (See page 12.)
• Change Disposable Inner Bag. (See page 7-8.)
• Contact us on AU: 1300 361 505 / NZ: 0800 800 900
• Contact us on AU: 1300 361 505 / NZ: 0800 800 900
• Contact us on AU: 1300 361 505 / NZ: 0800 800 900
• Clear blockage. (See page 12 for instructions.)
we're here to help
For troubleshooting please
call or visit our website:
AU: 1300 361 505
vax.com.au
NZ: 0800 800 900
vax.co.nz