Location Of User's Control - Sharp 32SF560 Service Manual

LOCATION OF USER'S CONTROL

Front Panel
POWER
Press On.
Press again Off.
REMOTE CONTROL
SENSOR
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD (0 – 9)
Sets the channel.
FLASHBACK
Returns to previous channel.
•
(DOT)
Sets the channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
( + ) Increases sound.
( – ) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will
be for TV and VCR control.
In CATV/DVD position, signals sent
will be for cable TV converter and
DVD control.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark
display on the remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from
their actual appearance.
POWER MENU – VOL + CH
PULL-OPEN
POWER MENU – VOL + CH
VOLUME UP/DOWN
( + ) Increases sound.
( – ) Decreases sound.
POWER
DVD
TV
VCR DISPLAY INPUT
1 2 3
4 5 6
7 8 9
FLASHBACK ENTER
0
PERSONAL PREFERENCE
A B C D
CH
VOL VOL
ó +
CH
MENU MUTE
CATV TV
DVD VCR
REW PLAY FF
CH/SKIP
PAUSE STOP REC
TV CATV VCR DVD
5
VIDEO/AUDIO IN 2
TERMINALS
(INSIDE DOOR)
CHANNEL UP/DOWN
( ) Selects next higher channel.
( ) Selects next lower channel.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel
for 4 seconds.
Press again Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switches to external video
INPUT 1 mode.
Press twice Switches to external
video INPUT 2 mode.
Press 3 times Switches to external
video INPUT 3 mode or
COMPONENT mode.
Press 4 times Switches back to
the original TV mode.
ENTER
• Used to confirm the channel
selection and Personal Preference
channel.
• Used in some instances where a
Cable Converter Box requires an
"enter" command after selecting
channels, when using the REMOTE
KEYPAD button.
CHANNEL UP/DOWN
( ) Selects next higher channel.
( ) Selects next lower channel.
• Moves the " " mark on the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
32SF560