Messages In The Multifunction Display; Battery - Mercedes-Benz 2010 ML 450 Hybrid Supplemental Operating Instructions

164_ZA; 2; 2, en-US
d2ureepe,
Practical hints
30
Problem
The warning and
indicator lamps in the
instrument cluster fail
to come on when
switching on the
ignition.
Combustion engine
Problem
The combustion engine
cannot be started. The
warning and indicator
lamps in the instrument
cluster come on when
switching the ignition.
The combustion engine
cannot be started. The
multifunction display
does not display any
messages.
RBS (Recuperative Brake System)
Problem
Less brake pedal
pressure is required
and the brake pedal
travel is longer than
usual.
Possible causes/consequences and X Solutions
The 12-volt battery and/or the high-voltage battery are
discharged.
X
Charge the 12-volt battery (
or
X
Get a jump start ( Y page 33).
or
X
Contact an authorized Mercedes-Benz Center.
Possible causes/consequences and X Solutions
The high-voltage battery is discharged.
The discharged high-voltage battery is being charged with the
ignition switched on while the vehicle is being jump started
( Y page 33).
X
Read and observe messages that may appear in the
multifunction display (
The self-diagnosis has not been completed yet or the HYBRID
system is malfunctioning.
X
Switch off the ignition and switch it back on.
X
Try to start the combustion engine once more.
X
If the combustion engine cannot be started: Contact an
authorized Mercedes-Benz Center.
Possible causes/consequences and X Solutions
X
Apply the brake pedal fully and release it.
The required brake pedal pressure and the brake pedal travel
are back to normal.
The RBS is malfunctioning.
Risk of accident!
X
Read and observe the messages in the multifunction display
( Y page 24) and the notes on warning and indicator lamps in the
instrument cluster ( Y page 29).
2009-05-12T15:08:04+02:00 - Seite 30
Version: 2.11.8.1
Y page 32).
Y
page 24).