Product Description - Buderus Logano plus GB312 Operating Instructions Manual

2.5

Product description

The Logano plus GB312 ( Fig. 1) is supplied with a fully factory-fitted
and ready-wired Logamatic BC10 basic control unit ( Fig. 2, page 6).
Fig. 1 Logano plus GB312 - main components
[1] Programmer (MC10 and BC10)
[2] Gas burner
[3] Boiler front panel
[4] Trap
[5] Boiler heat exchanger with insulation
[6] Burner control unit
[7] Gas valve
[8] Boiler outer jacket
[9] B-kit with non-return check valve
(supplied as standard, not factory installed)
[10] Gas isolating valve (supplied as standard, not factory installed)
[11] Mating flange, 2½ "
[12] Bolts, washers, Lock washers and nuts
(to mount supply manifold and mating flanges)
The main components of the Logano plus GB312 ( Fig. 1) are:
• Control
• Frame and jacket
• Boiler heat exchanger with insulation
• Gas burner
• B-kit (standard B-kit comprising temperature/pressure gauge,
pressure relief valve, supply manifold, flow check valve, mating flange
for flow/return piping, not factory installed)
• Gas isolating valve
The programming unit monitors and controls all electrical boiler
components.
The boiler heat exchanger transfers the heat generated by the burner to
the heating water. The thermal insulation reduces radiant and standby
heat loss.
Logano plus GB312 – 7 747 010 717 (2012/11)
Details of the product
12
10
11
2
7 747 010 720-01.3RS
5