Washer Fluid; Messages In The Multifunction Display - Mercedes-Benz 2010 E-Class Coupe Operator's Manual

Vehicle status messages in the multifunction display
Display messages
Key Not
+
Detected
(message
appears in
red)
Key Not
+
Detected
(message
appears in
white)
Remove
+
'Start'
Button
and
Insert Key
Check
¥
Washer
Fluid
Power
D
Steering
Malfunctio
n
See
Operator's
Manual
Possible causes/consequences and M Solutions
The SmartKey with KEYLESS-GO is not detected while the
engine is running because there is strong radio-frequency
interference.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Remove the KEYLESS-GO button from the starter switch
( Y page 79).
X
Operate the vehicle with the SmartKey in the starter switch.
The SmartKey with KEYLESS-GO is momentarily not detected.
X
Change the position of the SmartKey in the vehicle.
X
If necessary, remove the KEYLESS-GO button from the
Y
starter switch ( page 79).
The KEYLESS-GO system is malfunctioning.
X
Remove the KEYLESS-GO button from the starter switch
Y
( page 79).
X
Operate the vehicle with the SmartKey in the starter switch.
The washer fluid in the washer fluid reservoir has fallen below
the minimum level.
X
Add washer fluid ( Y
Power assistance for the steering system is not available. A
considerably higher degree of effort is necessary to steer the
vehicle.
X
Check whether you are capable to apply the higher degree
of effort necessary to safely steer the vehicle.
If you are able to steer the vehicle safely:
X
Continue driving with added caution.
X
Have the system checked at an authorized Mercedes-Benz
Center.
If, in any way, you feel that you are not able to steer the vehicle
safely:
X
Stop the vehicle in a safe location as soon as it is safe to
do so.
X
Apply the parking brake.
X
Do not continue to drive.
X
Contact an authorized Mercedes-Benz Center.
page 191).
251
Z