Sixnet MobilityPro BT-5600 Series Quick Start Manual

OVERVIEW

The MobilityPro™ BT-5600 series modems are rugged 3G
wireless modems built
communication over the EVDO Rev. A cellular data network.
This guide covers initial configuration of the following model:

FEATURES


CDMA EVDO Rev. A with fallback to Rev. 0 a, 1XRTT
and IS95

Diversity antenna

Ethernet, Serial, USB, and WiFi (5630 model only)

Reliable Always-on cellular link

Rugged industrial design

Remote diagnostics, configuration and updates

3 Analog inputs, 4 Digital inputs, 3 Digital outputs

IPsec VPN multiple tunnel and 3DES|AES up to 256-bit
encryption

LED INDICATORS

LED State Description

Power

ON Power is applied to the modem
ON Excellent signal strength
Signal FLASH Flashes faster as signal is stronger
OFF Very weak or no signal (less than -100 dBm)
ON Wireless link established, but no data activity
WAN
FLASH Data transmitted/received on wireless network
ON Link established with serial device but no data
activity
RS-232
FLASH Data transmitted/received with attached serial
device
ON Position fix available
GPS
OFF No position fix available
Ethernet ON Link established with Ethernet device
Link
FLASH Data transmitted/received with attached Ethernet
Ethernet
device
Activity

ADDITIONAL INFORMATION

Visit our support site at www.sixnet.com
User's Guide for an in-depth overview of the modem's features
and capabilities, as well
troubleshooting. Also available for download are BlueVue
software updates and modem firmware updates.
to provide simple and
BT-5600
BT-5630
to access the Modem
as configuration help
POWER
The modem has a 4-pin Molex connector for power input, and
reliable requires a power source between 8 and 30 VDC:
Label
GND
POS
IGN
O3
* An AC-DC power adaptor can be purchased as an accessory from your sales contact.

ANTENNA

An antenna with an SMA connector should be connected to the
modem. This antenna should meet the following specifications:

Dual-band 800 & 1900 MHz

Nominal 50 ohm impedance

Voltage Standing Wave Ratio (VSWR) less then 2.5:1
* Antennas can be purchased as accessories from your sales contact.

DATA INTERFACES

Ethernet: 10/100 Mbps Auto-sensing Female RJ45 port
USB: USB 2.0 Type B Female
Serial: RS-232 9 pin DCE Female, with these default settings:
Speed: 115200 bps
Data bits: 8
Parity: None
Stop Bits: 1
Flow Control: Hardware

SUPPORT CONTACT INFO

Toll-free
Phone
Hours
Email
Website
Fax

WARRANTY

Sixnet, LLC wireless products including the BT-5600V2, BT-5800 and the BT-6000
series, Sixnet's obligation under this warranty will be limited to repairing or
replacing, at Sixnet's option, the defective parts within three year of the date of
installation, or within 36 months of the date of shipment from the point of
manufacture, whichever is sooner.
Sixnet further warrants that any software supplied as part of a product sale, except
obsolete products, will be free from non-conformances with Sixnet published
specifications for a period of 90 days from the time of delivery. While Sixnet
endeavors to improve the features and performance of software associated with its
products, no effort on the part of Sixnet to investigate, improve or modify Sixnet
software at the request of a customer will obligate Sixnet in any way.
This limited warranty does not cover losses or damages which occur in shipment to
or from Buyer or due to improper installation, maintenance, misuse, neglect or any
cause other than ordinary commercial or industrial applications. This limited
warranty is in lieu of all other warranties whether oral or written, expressed or
implied. Sixnet's liability shall not exceed the price of the individual units, which are
the basis of the claim. In no event shall Sixnet be liable for any loss of profits, loss
of use of facilities or equipment, or other indirect, incidental or consequential
damages.
and
For complete and most up-to-date warranty information go to www.sixnet.com.

QUICK START GUIDE

MobilityPro™ BT-5600 Series
Aeris Wireless Modem
Color Description
Black Ground
Red Power 8 to 30 VDC
(500mA@12VDC)
White Ignition sense
Green Digital output
+1 877 422 9110 option 2
+1 514 422 9110 option 2
8:30am – 5:00pm Eastern Time
support@sixnet.com
www.sixnet.com
+1 514 422 3338