Canon ImageRUNNER Advance C5255 Basic Operation Manual page 13

Things You Can Do with the Fax Functions
This section describes the functions you can use on the [Options] (1/2 and 2/2) screen of the Fax function. The [Options] screen is divided
into two screens. Pressing
to use the Fax function.
2
1
12
11
[Original Type]
1
Image quality for scanning is adjusted according to the type
of original, such as [Text], [Map], or [Photo].
[2-Sided Original]
2
Set to send two-sided originals. You can select [Book Type] or
[Calendar Type].
3
[Book 2 Pages]
You can scan facing pages, such as in a book one sheet at a
time.
[Diff erent Size Originals]
4
You can scan originals of diff erent size fed together in one
group.
[Erase Frame]
5
This mode enables you to erase shadows that appear when
scanning various types of originals. You can also erase
shadows of the punch holes.
[Direct Send]
6
Check that the recipient can receive the facsimile, and then
start scanning the originals. You can directly send without
storing the original in the memory.
[Select Line]
7
You can select the telephone line to use for sending a
facsimile.
36
or on the bottom right of the screen displays the next or previous screen. An optional product is required
10 9 8
[Options] 1/2
7
[Sender Name (TTI)]
8
You can register a department name or personal name in
advance, and show this on the destination fax machine.
* Set the Sender Name after specifying the destination.
[Job Build]
9
You can scan originals that are too many to be placed at once,
by dividing them into multiple batches. After all originals are
scanned, sending is started.
[Density]
10
Change the exposure. You can press
exposure darker or to make the exposure lighter. You
can set the machine to automatically adjust the exposure.
[Sharpness]
11
This mode enables you to scan the originals with a sharper
or softer contrast. You can use this mode when you want to
soften and sharpen text, lines, or the outline of the image.
[Copy Ratio]
12
Specify the desired zoom ratios. You can change the zoom
ratio by reducing/enlarging a scanned document to a preset
paper size, or by entering a value to specify a desired scan
ratio.
Functions with this mark require an optional product(s).
3
4
5
6
to make the