Rv 4G And Desktop Antenna Placement; Power Supply Options - weBoost RV 4G User Manual

RV 4G and Desktop Antenna
Placement
1. Select a location for the RV 4G that
is away from excessive heat, direct
sunlight, and moisture and has proper
ventilation. Recommended locations
include on a shelf, in a closet or
cupboard. Be sure the location is
near a power outlet. To ensure proper
ventilation, keep other objects at least six
(6) inches away.
2. Place the RV 4G on a desk, table or
other solid surface where you have
routed the cable from the Outside
Antenna.
3. Attach the coax cable from the Outside
Antenna to the RV 4G at the connector
labeled "Outside Antenna."
4. Attach the Desktop Antenna to the
connector labeled "Inside Antenna."
5. Ensure the Desktop Antenna is facing
away from both the RV 4G and the
Outside Antenna.
6. Plug in the power supply to the RV 4G
at the input marked "Power" (next to the
"Outside Antenna" connector).
7. Check the lights on top of the RV 4G. 4
green lights mean the booster is working
properly. If you do not have green lights,
see the following Troubleshooting Tips.
Need help?
Note
Face Inside Antenna
away from RV 4G and
Outside Antenna
www.weboost.com

Power Supply Options

There are 3 options for powering up the RV 4G.
Option 1: AC/DC Power Supply
The AC power supply (859948) will provide
power for 110v connections.
Option 2: DC/DC Power Supply
The DC/DC Power Supply (859113) will
provide power through a CLA connection.
Option 3: Hardwired Power Supply
For a hardwired connection, the DC/DC power
supply (859113) can be physically altered.
This allows you to directly connect the power
supply to a power source – this is useful for:
-connections to a battery or dry camping
-direct power connections to a vehicle, or RV
To do this:
Lay out your DC/DC power supply.
Cut off the CLA power adapter. Make sure
that the inline regulator is intact – this will
ensure the proper power is delivered to your
booster.
Strip the wire, noting which is positive
and negative (white stripe=positive,
black=negative)
Connect to your power source.
Customer Support 866-294-1660
Mon.- Fri. Hours: 6 am to 7 pm MST, Sat & Sun 8 am to 5 pm MST
7