Install Outside Antenna Mount - weBoost RV 4G User Manual

Install Outside Antenna Mount

Ready to Install Outside Antenna Mount
1. Select a location roughly in the
direction of the strongest cellular
signal (see section headed "Find the
Strongest Cellular Signal" on page 4).
2. Clean the area on the side of the RV
with the alcohol prep pad included.
3. Insert the suction cups included into
the holes on the Outside Antenna
cradle using a twisting motion. Place
bumper (included) between the
suction cups.
4. Press the suction cups onto the RV in
the desired location.
Note: For best performance, vertical
distance or higher mounting of the
antenna is recommended.
Need help?
www.weboost.com
5. Adhere the supplied 3M tape (optional)
to the back of the antenna and
Place the cover over the back of the
antenna.
6. Insert the Outside Antenna into the
cradle (the cover that you installed
should face the RV).
7. Connect the supplied coax cable to
the antenna lead cable on the Outside
Antenna.
8. Route the cable as desired to the location
of the RV 4G. If you need use both coax
cables, attach the 15' extension cable.
Customer Support 866-294-1660
Mon.- Fri. Hours: 6 am to 7 pm MST, Sat & Sun 8 am to 5 pm MST
5